Amano MTX-15 Bedienungsanleitung PDF herunterladen (Seite 7)

MTX-15 Installation & Operation Guide Page 1-3

Wall Mounting

Warning! Before selecting a mounting location for your MTX-15, you

must consider the following:

 The mounting surface and hardware must be able to support the

unit’s weight, 6 lbs. (2.7 kg).

 The area must be within the specified operating temperature range.

 Close proximity to a power source or wall outlet.

 The area or wall can accommodate signal and/or power conduits.

Note: Wiring can be routed through either cable feed.

Note: If you are using rigid (1/2” EMT) conduit, secure the conduit to

the bottom cable feed using two nuts, making sure the pipe

doesn’t extend beyond the thickness of the nut. Do not bend

the cable feed.

Amano recommends the following procedure for wall

mounting:

Step 1. Insert the key into the keyhole, turn clockwise, and remove the

back plate as shown (see Figure 3). Set the terminal face up

on a flat surface. Do not remove the key.

Figure 3: Rear Back Plate Removal

Step 2. Using the back plate as a template, mark the location of the

upper mounting hole on the wall. Mark a vertical line on the

wall as a guide to align the lower mounting hole.

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Keine Kommentare

Amano MTX-15 Bedienungsanleitung Seite 7